Well… Hello There!

Posted by on Nov 4, 2014 in DK2, iMD, Let's Play, Oculus Rift, Technology, Updates

Well… Hello There!

So… in terms of updates, there are many. However, I’ll start off with the usual apology: sorry, Nick and I are very busy and have been completely inactive on iMD for months.  Now that that’s finished, I’ll continue.

 

As I said earlier, I preordered the Oculus Rift DK2. Not only did I preorder it, but I just received it a few days ago. Now… since I’m not Nick, I wasn’t able to make a great unboxing video, however, from here on, there will be Oculus Rift content. I’ve already tried it out on a few simulators (ie. Matrix simulator, Live For Speed 2, Tron Light Cycles Simulator, etc.).

 

To clarify, since the Oculus Rift is a one person headset, Nick and I will somehow figure out how to record content of both of us playing, whether it be turn-based or whatever. But don’t worry, there WILL be videos of us falling off our chairs as we use the headset…

 

Stay Hungry…

Stay Foolish

 

 

Read More »

Olympus PEN E-PL1 Review

Posted by on Aug 8, 2014 in iMD, Olympus PEN E-PL1, Technology

Olympus PEN E-PL1 Review

So, here comes the full-fledged review. I’ll break it down into 3 main parts, as follows: Overall Picture Quality, Ease Of  Use, and Compatible Lenses.

 

1. Overall Picture Quality

The overall quality of the camera is very impressive. As a 4/3 camera should be (having practically the same technical specs as an entry-level DSLR), the Olympus PEN E-PL1 (which I’ll refer to as the Olympus PEN) created stunning stills (some which can be found on the photography page here). Colors were vibrant, edges were crisp, and blurred backgrounds looked fantastic. However, this camera only performed well at very low ISO settings due to a Noise Reduction feature at ISO settings under 200. When at any setting higher, the camera, even in auto mode, had trouble with lighting, focusing, and a lot of noise in photos.

Example of “No Noise” and “Noise”:

No noticeable noise in the photo.

There is lots of noise and grain in the photo zoomed in.

2.  Ease Of  Use

Ease Of  Use was a major setback when taking pictures with the Olympus PEN. There were loads of issues I had with the GUI and menu configuration as well as the actual LCD screen and electronic viewfinder. Disclaimer however, since I received the camera second-hand, I didn’t get to see its manual and therefore don’t know if some of these issues were discussed in the original guide to the camera. Continuing, the camera’s menu is very convoluted (Check out a picture of it here) and appears in a high contrast blue-yellow theme. A larger problem, however, is the fact that the 2.7″ LCD screen and electronic viewfinder (available separately as an accessory) both don’t accurately show you what you’re taking a picture of. While it appears on the screen as good lighting and an optimal ISO-shutter speed configuration, once you take the picture, you see that it is in fact so dark that you can’t make out any details whatsoever. Because of this flaw with the live view feature, your pictures can end up as high quality black or white boxes at 4032×3024 resolution. The best method of configuring your settings in manual mode is by taking at least 5-10 versions of the same picture, each time adjusting ISO, shutter-speed, and whatever else.

3. Lens Compatibility

Let me just start by saying that there are many, many different lenses available for use on this camera, however i’ll be talking about standard, not specialty or filter lenses, such as the camera’s kit lens. Alright, the kit lens (the lens you receive on purchase, unless of course you buy it body-only)… This lens is decent. It can’t be considered amazing, yet it doesn’t completely suck. Here’s what I mean. The kit lens is a 14-42mm zoom lens (which is a lens that can zoom in and out between these two sizes). The minimum f-stop number (or the largest size for the aperture) is f-3.5 , which isn’t that bad, pretty standard for kit lenses. While this lens may work for a casual photographer, many who want to broaden their variety of pictures and also significantly improve the quality of their photos will look to buying new lenses, some of which will include FFL (Fixed Focal Length) lenses, which while they can’t zoom will have much better maximum aperture, an f-stop of usually 1.8 . Olympus Zuiko, a line of lenses compatible with the Olympus PEN series, sells FFL lenses at 20mm to even 45mm. There are more zoom lenses which, at a much higher price, will also have an f-stop of 1.8 . But, these higher quality zoom lenses and larger FFL lenses (20mm or larger) can cost over $500, much more than the original cost of the camera of about $350. Even the kit lens itself is only available for between $150-200, a ridiculous amount. Another issue with this camera, the overly expensive extra lenses.

As a last thought, I should say that this camera is a very solid choice among other Interchangeable lens and 4/3 cameras, however it in no way can stand up to DSLR cameras, even entry-level ones, such as Nick’s Nikon d-5200.

Read More »

The Camera Has Arrived

Posted by on Aug 6, 2014 in iMD, Technology, Updates

The Camera Has Arrived

So, I’ve recently received an Olympus PEN E-PL1 micro 4/3 camera as a gift, for my birthday, which was on July 29th.  I’ve already taken many test shots, some of which were actually good. Since it’s my first time using a DSLR, or rather a hybrid DSLR. The definition of a 4/3 camera, basically a very portable DSLR. I’ve been practicing in both Manual and Automatic, usually trying comparing f-stop (aperture), shutter speed, and ISO settings specifically. I’ll be doing a more thorough review of the camera in nearby future. But for now, many of the pictures I take will be posted here.

 

Yes, I’m actually still doing the signature still…

 

Stay Hungry…

Stay Foolish

Read More »

February Break

Posted by on Feb 13, 2014 in Anime, David, iMD, Technology, Updates

February Break

So, February Break is on its way, and WOW,  we’ve been lazy…

Nick and I, most likely, will do something productive over the break. Personally, I’ll shorten my anime-watching in order to work on a cool project. Now onto the few, VERY few, updates that I have to offer…

  • Prashant may, or may not, be making some more art for iMD
  • There will be a few test clips with the DSLR video camera Nick bought
  • My watched anime list now exceeds 1,000 hours (or was it 10,000?)
  • I’m thinking of getting my hands on Rust, a new survival type game, loosely based off of Minecraft
  • I’ve “acquired” an Ethernet cord which is around 50ft long. Now we’ll be able to get two computer running in the HQ (a Windows desktop for me and Nick’s Macbook Air)
  • I have bought a PS4, with which I may record video, and maybe even with Nick

Now that the small list of updates is over, I’ll share a story. A few weeks ago, I installed an Ethernet switch. Somehow, I managed to make a wired connection more unreliable than WiFi…

Also, one last thing, I’m taking out my signature in order to minimize the time it takes to type/format it, while in hope of a signature feature in WordPress.

Read More »

For The Hipsters Out There

Posted by on Nov 3, 2013 in Emulators, Game Boy Advance, iMD, Nostalgia, Technology

For The Hipsters Out There

The past week has been very eventful for me. Mostly because I found a free GBA (Gameboy Advance) emulator that works on Non-Jailbroken iPhones. It’s called Gba4ios and can be downloaded by clicking Here . This emulator is amazing!  A really great feature is the “Toggle Speed” button (though only available on select devices, iPad 2+, iPhone 4s+, Ipod Touch 5+) which speeds up the game somewhere between 2x and 4x speed. The developer plans to fix the current buggy sound, add full compatibility with Gameboy Color games, and add cheat compatibility in the next version (2.0). Impotrant Note: MAKE SURE TO SET YOUR DATE BACK TO BEFORE JULY 2012! The only way the emulator can be downloaded is by bypassing Apple’s security through a glitch with  MacBuildServer (Some thing available to App Developers, also, if you like to be updated on the program go Here ).

Now on to a slightly different topic. For PC (I’m only sure it works on Windows though) is a new mod/plugin to the already existing Visual Boy Advance GBA emulator . It’s called VBA link (download Here ). What this program does, is allow you to emulate the GBA Connector Cable (which allowed multiplayer) through the Visual Boy Advance GBA emulator either as 2 games on 1 computer or 2 computers with 1 game each via the same network, this way, you can always trade/battle your Pokémon even on an emulator, race karts in Mario Kart, or of course, anything else using multiplayer. All you have to do, is download the VBA link plugin + emulator, since the website given is a download for the emulator with an already installed VBA link plugin/mod.

 

Stay Hungry…

Stay Foolish

 

 

Gba4ios Portrait UI

Gba4ios Portrait UI

Read More »

We’ve Done It!

Posted by on Oct 8, 2013 in Colonizing America, iMD, Minecraft, Technology, The iMD Server

We’ve Done It!

Here it is folks, the moment you’ve all you’ve been waiting for: the completion of the Colonizing America trailer! There’s some really awesome news, but also some cruddy news. I’ll start with the awesome news: It’s done! We’ve finished it, the song, voice over, are all amazing! Now the bad news: when we were panning the landscape, there were some annoying chunks that didn’t want to completely load. We’d really would’ve loved there not to be any. Both Nick and I are very sorry and hope you’ll be forgiving for tarnishing the experience.

 

Stay Hungry…

Stay Foolish

 

 

Read More »